Metallurgy


  Fluorspar(fluorite concentrates) is supplied in the form of gravity concentration products, as well as in the form of lump sorted concentrates that are intended for use in the metallurgical industry.

Depending on the technology of production, physical and mechanical properties, the content of the main component and impurities fluorite concentrates are classified into types and grades

Concentrate type

Grade

Fluorite, lump (sorted) - FC

 

Fluorite, Gravity – FG

 

FK-95А, FK-95B, FK-92, FK-85, FK-75, FK-65

FG-92, FG-85, FG-75, FGM-75, FG-65,

FG-55

Obligation according to calcium fluoride limits, contaminants and physical characteristics of the concentrates is established by the mutual agreement between the consumer and the supplier.

Chemical industry


  Fluorspar (fluorite concentrates) supplied in the form of flotation concentration is intended for the production of hydrofluoric acid, fluoride salts and use in chemical and glass industries.

Depending on the main component and impurities content, fluorite concentrates are classified into the following brands: FF-97A, FF-97B, FF-95A, FF-95B, FF-92B, FF -90.

Obligation according to calcium fluoride limits, contaminants and physical characteristics of the concentrates is established by the mutual agreement between the consumer and the supplier

Special purpose


  Fluorspar (fluorite concentrate) is intended for the welding materials production of general and special purpose: the electrodes, flux cored wire, fused and ceramic welding fluxes.

Depending on the production technology, physical and mechanical properties, the main component and impurities content fluorite concentrates are classified into types and grades:

Concentrate type

Grade

FCC -  fluorite lumps welding

 

FGS - fluorite gravity welding

 

FFS - fluorite flotation welding

FKS-95А, FKS-95B, FKS-92, FKS-85, FKS-75

FGS-92, FGS-85, FGS-75

 

FFS-97А, FFS-97B, FFS-95, FFS-92